Rogers PCB Quote: What to Include, What Affects Price and How to Get an Accurate Number Fast
Exactly what information to send for a Rogers PCB quote, the 6 factors that drive price, reference price ranges for common prototype specs, and how to get an accurate quote within 4–8 hours.
Table of Contents
Key point: For an accurate Rogers PCB quote, send: Gerber + NC drill, material grade (e.g. RO4350B not just "Rogers"), dielectric thickness per layer, layer count, copper weight, quantity, IPC Class, and impedance target. Missing stackup drawing is the most common cause of slow or inaccurate quotes.
Riching PCB returns quotes within 4–8 hours with complete information. RO4350B, RO3003, RT5880 in stock — no material wait. Send files via WhatsApp +86 13760473650.
Getting an accurate Rogers PCB quote requires sending more information than a standard FR4 PCB quote. The two most common reasons for slow or inaccurate Rogers quotes: missing stackup drawing (the factory has to assume material thickness and copper weight) and missing impedance specification (the factory cannot price TDR verification without knowing the tolerance). This guide covers exactly what to send, what drives Rogers PCB price, and reference price ranges so you know whether a quote is in the right range before you proceed.
What to Include in a Rogers PCB Quote Request
Mandatory — without these, no accurate quote is possible
- Gerber files (.zip, RS-274X) + NC drill file
- Material grade — e.g. Rogers RO4350B, RO3003, RT5880 (not just ‘Rogers PCB’)
- Dielectric thickness per layer — e.g. ‘0.254mm RO4350B core’ (not just ‘1.6mm total board’)
- Layer count — e.g. 2L, 4L, hybrid stackup
- Copper weight per layer — e.g. ‘1oz outer / 0.5oz inner’
- Quantity — prototype qty and production volume if known
- IPC Class — Class 2 (commercial) or Class 3 (military/aerospace)
Strongly recommended — speeds up quote and reduces back-and-forth
- Controlled impedance target and tolerance — e.g. ’50Ω ±10%’ or ’50Ω ±5%’
- Reference layer — e.g. ‘microstrip on L1 referenced to L2’
- Operating frequency range — e.g. ’28 GHz Ka-band’ helps DFM review
- Surface finish if not ENIG — hard gold, ENEPIG, immersion silver
- Delivery country / city — for shipping cost estimate
6 Factors That Drive Rogers PCB Price
| Price Factor | Lower Cost | Higher Cost |
|---|---|---|
| Material grade | RO4350B (FR4-compatible process) | RO3003 / RT5880 (PTFE — 3–5× raw material) |
| Quantity | 20–50 boards (good panel utilisation) | 1–3 boards (most panel material wasted) |
| Layer count | 2-layer single material | 4+ layer hybrid or all-Rogers |
| Impedance tolerance | ±10% standard | ±5% — adds TDR labour cost |
| Surface finish | ENIG standard | Hard gold / ENEPIG — significant premium |
| IPC Class | Class 2 commercial | Class 3 — more inspection, longer lead time |
Material grade and quantity are the two largest variables. The difference between 5 boards and 25 boards on the same Rogers spec can be 2–3× per-board price — because Rogers material is ordered in full panels regardless of board count, and more boards from the same panel dramatically reduces material waste per unit.
Reference Price Ranges
| Spec | 5 boards | 10 boards | 25 boards |
|---|---|---|---|
| RO4350B 2L 100×100mm ENIG ±10% | USD 90–130 | USD 130–180 | USD 220–320 |
| RO4350B 4L hybrid 150×150mm ENIG ±10% | USD 200–280 | USD 280–380 | USD 480–650 |
| RO3003 2L 100×100mm ENIG ±10% | USD 150–220 | USD 200–300 | USD 360–500 |
| RT5880 2L 100×100mm ENIG ±10% | USD 180–260 | USD 240–340 | USD 420–580 |
| RO3003 2L 100×100mm ENIG ±5% | USD 180–260 | USD 240–340 | USD 430–590 |
Indicative USD prices. Excludes DHL Express shipping (USD 40–80 to USA/Europe). Subject to material cost changes. Contact for exact quote.
These are indicative ranges for Riching PCB standard prototype pricing, including ENIG surface finish, standard IPC Class 2, ±10% impedance tolerance. Prices exclude DHL Express shipping (typically USD 40–80 to USA/Europe). Prices are in USD and subject to material cost fluctuation.
Key observations from the table:
- Going from 5 to 25 boards reduces per-board cost 50–60% on most Rogers specs
- PTFE materials (RO3003, RT5880) are 60–100% more expensive than RO4350B at the same spec — plasma process + raw material premium
- ±5% impedance tolerance adds 15–25% to price vs ±10% — TDR labour and potential yield impact
- 4-layer hybrid is approximately 2–2.5× the price of equivalent 2-layer single-material
Why Quotes Without a Stackup Drawing Are Inaccurate
A Rogers PCB quote without a stackup drawing forces the factory to make assumptions. The most common assumption: ‘standard 1.6mm board, 1oz copper, one core material’. For Rogers PCB, this assumption is almost always wrong:
- 508mm vs 0.254mm RO4350B core: different panel count, different material cost, different 50Ω trace width
- 1oz vs 0.5oz copper: affects minimum trace width DFM check and etching cost
- Hybrid stackup vs all-Rogers: completely different material BOM and lamination process
The fastest way to get an accurate quote: send a 1-page stackup PDF alongside your Gerber zip. Even a simple hand-drawn diagram specifying layer order, material and thickness is enough. If you do not have a formal stackup drawing, write the spec in the email: e.g. ‘RO4350B 2L, 0.508mm core, 1oz finished copper both sides’.
How Long Does a Rogers PCB Quote Take
- Standard Rogers quote with complete information: 4–8 hours during Shenzhen business hours (GMT+8 09:00–18:00 weekdays)
- Quote requiring DFM review before pricing: same day or next morning
- Complex hybrid stackup or unusual material: 1 working day
- Fastest path: send via WhatsApp — response faster than email for initial discussion
Conclusion
A Rogers PCB quote requires material grade, dielectric thickness, layer count, copper weight, quantity and IPC Class — not just Gerber files. The two biggest price drivers are material grade (PTFE vs hydrocarbon ceramic) and quantity (panel utilisation). Reference prices: RO4350B 2L 5 boards USD 90–130; RO3003 2L 5 boards USD 150–220; 4L hybrid 5 boards USD 200–280. Quotes with complete information returned in 4–8 hours. Send files to WhatsApp +86 13760473650 or see Rogers PCB price guide for more detailed pricing.
Get Your Rogers PCB Quote — 4–8 Hours
Send these files for an accurate quote. RO4350B, RO3003, RT5880 in stock. No MOQ.
- Gerber files (.zip) + NC drill file
- Material grade — e.g. RO4350B, RO3003, RT5880
- Stackup: dielectric thickness + copper weight per layer
- Impedance target and tolerance (±10% or ±5%)
- Quantity and IPC Class
WhatsApp +86 13760473650— quote within 4–8 hours
Rogers PCB Quote Q&A
Common questions about what to include in a Rogers PCB quote, reference prices, quote turnaround and why small quantities cost more.
What information do I need to get a Rogers PCB quote?
Required: Gerber zip + NC drill, material grade (e.g. RO4350B — not just "Rogers"), dielectric thickness per layer, layer count, copper weight, quantity, IPC Class. Recommended: impedance target and tolerance, reference layer, surface finish. Missing stackup drawing = slow or inaccurate quote.
How much does a Rogers PCB prototype cost?
RO4350B 2L 100×100mm: 5 boards USD 90–130, 25 boards USD 220–320. RO3003 2L: 5 boards USD 150–220, 25 boards USD 360–500. RT5880 2L: 5 boards USD 180–260. Excludes shipping USD 40–80. Exact quote in 4–8 hours.
How long does a Rogers PCB quote take?
Complete information: 4–8 hours (Shenzhen business hours GMT+8). Complex hybrid stackup: same day or next morning. Fastest: WhatsApp.
Why is my Rogers PCB quote delayed or inaccurate?
Two causes: (1) Missing stackup drawing — factory must assume thickness and copper weight. (2) Missing impedance spec — TDR cost cannot be priced without ±10% or ±5% tolerance. One-page stackup PDF fixes both.
Why does ordering more Rogers PCBs cost much less per board?
Rogers is ordered in full panels. 5 boards from a 25-board panel = 20 boards of wasted material divided across 5. 25 boards = nearly full panel utilisation. Going 5→25 boards reduces per-board cost ~50–60%.
Request a PCB Quote
Upload your Gerber ZIP file and project requirements. Our engineering team will review your PCB material, stackup, impedance needs, surface finish, and production quantity before quoting.
Please prepare:
- Gerber files in ZIP format
- PCB material or stackup requirements
- Controlled impedance notes if available
- Prototype or batch production quantity