High Frequency & Microwave PCB Manufacturer
Rogers, PTFE, Taconic and F4B PCB fabrication for RF, radar, 5G antenna and satellite communication applications. Controlled impedance, 2–36 layers, prototype to volume production.
High Frequency PCB Solutions
High Frequency PCB
High Frequency PCB is designed for circuits that require stable signal transmission at high frequencies. These boards are commonly used in RF communication, radar systems, antenna modules, wireless devices, and high-speed electronic equipment.
We support high-frequency PCB fabrication with low-loss materials, controlled impedance, stable plated through-holes, and engineering review before production. Suitable materials include Rogers, PTFE, F4B, Taconic, and hybrid FR4 high-frequency stackups.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
RF PCB
RF PCB is built for radio frequency signal applications where impedance control, signal integrity, and low transmission loss are critical. It is widely used in wireless communication modules, RF amplifiers, filters, antenna systems, IoT devices, and testing equipment.
Our RF PCB manufacturing focuses on precise trace control, reliable RF connectors, low-loss substrate processing, and stable performance for prototype and batch production.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
Microwave PCB
Microwave PCB is used for higher-frequency applications where material stability, dielectric consistency, and accurate circuit geometry are essential. These boards are commonly applied in microwave communication, satellite systems, radar equipment, RF test instruments, and high-frequency modules.
We provide microwave PCB production using specialized materials such as Rogers, PTFE, and other low-loss laminates, with strict control over impedance, drilling, copper quality, and multilayer lamination.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
Rogers PCB
Rogers PCB is a preferred solution for high-frequency and microwave circuits that require low dielectric loss, stable electrical performance, and reliable signal transmission. Rogers materials are widely used in RF modules, 5G infrastructure, radar systems, antenna boards, and high-speed communication equipment.
We support Rogers PCB fabrication with materials from the RO4000 series, RT/duroid series, and other Rogers laminate options, depending on the project’s frequency, loss, thermal, and mechanical requirements.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
PTFE PCB
PTFE PCB is suitable for demanding RF and microwave applications that require very low signal loss and excellent dielectric stability. PTFE-based materials are often used in antennas, radar systems, aerospace electronics, satellite communication, and precision RF circuits.
Our PTFE PCB manufacturing process focuses on material handling, stable drilling, clean copper bonding, controlled impedance, and reliable multilayer processing for high-frequency performance.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
Antenna PCB
Antenna PCB is designed for wireless signal transmission and reception in RF communication systems. It is commonly used in 2.4GHz modules, WiFi, Bluetooth, IoT devices, GPS systems, base stations, and custom antenna designs.
We provide antenna PCB manufacturing with controlled impedance, accurate copper patterns, low-loss materials, and stable surface finishes to support consistent RF performance in real-world applications.
Send Your PCB Requirement
Tell us your PCB type, material, frequency, thickness, quantity, and application.
Gerber files can be sent later by WhatsApp or email.
Contact Us on WhatsApp
High-Performance PCB Materials We Support
We support Rogers, PTFE, Taconic, F4B and hybrid stackup materials for RF, microwave, antenna, radar and high-frequency electronic applications.
Rogers RO4000 Series
RO4350B, RO4003C and RO4725JXR available. DK 3.38–3.48, Df as low as 0.0027. Suitable for RF amplifiers, 5G antennas, communication modules and microwave PCB projects requiring stable dielectric performance.
Rogers RT/duroid Series
RT5880 (Dk 2.2, Df 0.0009) and RT5870 (Dk 2.33) available in thicknesses from 0.127mm to 3.175mm. Designed for radar, aerospace, satellite communication and advanced microwave systems requiring ultra-low loss.
PTFE Laminates
Low-loss PTFE materials with Df as low as 0.0009. Suitable for RF and microwave circuits where signal integrity and dielectric stability at high frequency are critical requirements.
F4B Materials
F4BM220 to F4BTM615 series with DK range 2.20–6.15. Cost-effective high-frequency material for communication devices, antenna boards and RF electronic assemblies.
Taconic Materials
TLY-5, TLP-5, RF-35, RF-60A and CER-10 available. DK range 2.17–10.0 covering a wide range of RF, microwave and high-speed applications requiring stable electrical performance.
FR4 + High Frequency Hybrid Stackups
Hybrid PCB stackups combining Rogers or PTFE core layers with FR4 for multilayer RF designs. Better cost control without compromising signal performance on critical layers.
Manufacturing Capabilities for RF & Microwave PCB Projects
From prototype to batch production, we focus on stable processing, controlled impedance, reliable drilling and engineering review for RF and microwave PCB projects.
Controlled Impedance
Impedance tolerance ±10% standard, ±5Ω for values below 50Ω. Verified by cross-section inspection and impedance testing before delivery.
Low-Loss Material Processing
Specialized handling for Rogers, PTFE, Taconic and F4B laminates. Plasma method for copper sinking on PTFE boards to ensure reliable adhesion.
Multilayer Lamination
2 to 36 layers supported. Hybrid stackups combining Rogers or PTFE with FR4 core available for cost-optimized multilayer RF designs.
Stable Plated Through Holes
Copper plating thickness 20–50μm in plated holes. Hole wall stability verified by cross-section inspection for multilayer and high-frequency boards.
Tight Tolerance Drilling
Minimum mechanical drill diameter 0.1mm. Hole diameter tolerance ±0.05mm. Aspect ratio up to 14:1 for high-density RF layouts.
Surface Finish Options
ENIG (gold 1–5μ″, nickel ≥120μ″), immersion silver, immersion tin, OSP, HASL and electroplated gold available based on application needs.
Prototype and Batch Production
Same process used for prototypes and production runs. Board performance stays consistent from engineering sample to volume order.
Engineering Review Before Production
DFM and stackup review before manufacturing starts. We flag impedance design issues, via structures and material selection problems before production.
Built for High-Frequency Applications
Our RF and microwave PCB manufacturing service supports industries where signal performance, low loss and stable material properties are essential.
RF Communication
PCB solutions for RF modules, wireless communication devices and signal transmission systems requiring low loss and stable impedance.
5G Infrastructure
High-frequency PCB support for 5G base stations, mmWave filters, antennas and communication equipment using Rogers and low-loss laminates.
Radar Systems
Microwave PCB manufacturing for automotive radar, military radar modules and high-frequency detection systems requiring precise circuit geometry.
Antenna Modules
Material and manufacturing support for 2.4GHz, 5GHz, mmWave and custom frequency antenna PCBs requiring stable DK and consistent RF performance.
Satellite Communication
High-reliability PCB solutions for satellite communication and aerospace electronic systems where signal integrity and material stability are critical.
Aerospace Electronics
RF and microwave PCB support for high-reliability aerospace electronic applications with strict requirements on material, plating and dimensional accuracy.
Quality Control for High Frequency PCB Production
High-frequency PCB production requires strict process control. We focus on material verification, impedance performance, plating reliability and structural stability before delivery.
Request a PCB Quote
Upload your Gerber ZIP file and project requirements. Our engineering team will review your PCB material, stackup, impedance needs, surface finish, and production quantity before quoting.
Please prepare:
- Gerber files in ZIP format
- PCB material or stackup requirements
- Controlled impedance notes if available
- Prototype or batch production quantity