RF PCB Manufacturer — Rogers & PTFE In Stock
Riching PCB manufactures RF PCB for communication, radar, antenna and EW modules across 1–40 GHz. Rogers RO4350B, RO4003C, RO3003, RT5880, RO3006, RO3010, Taconic and F4B materials in stock — no 3–4 week material procurement delay. In-house plasma activation for PTFE. TDR every lot. 7–10 day prototype. No MOQ.
Table of Contents
1–40
GHz coverage
Rogers + PTFE
In stock
RO4350B · RO3003
RT5880 · RO3006/3010
7–10
day PTFE prototype
no material wait
No MOQ
From 1 board
IPC Class 2 / 3
Manufacturing Capability
| Capability | Standard | Advanced |
|---|---|---|
| Materials | FR4, RO4350B, RO4003C | RO3003, RT5880, RO3006, RO3010, Taconic, F4B — all in stock |
| Layer count | 2–16 layers | Up to 36 layers |
| Min trace/space | 3mil / 3mil | 2.5mil / 2.5mil |
| Min drill | 0.2mm mechanical | 0.1mm laser |
| Impedance tolerance | ±10% standard | ±5% with TDR report |
| Surface finish | ENIG | Hard gold, ENEPIG, immersion silver |
| IPC Class | Class 2 | Class 3 on request |
| PTFE process | — | In-house plasma activation, max 2 lamination cycles |
| Prototype lead time | 5–7 days (FR4/RO4350B) | 7–10 days (PTFE) — no material wait |
Find Your Application
RF PCB requirements vary significantly by application — material grade, Dk uniformity, impedance tolerance and IPC Class all depend on the end use. Find the dedicated page for your application below for application-specific specifications, stock materials and ordering guidance.
| Application Area | Recommended Material | Dedicated Page |
|---|---|---|
| 77GHz automotive radar | RO3003 0.127mm | 77GHz Radar PCB Manufacturer → |
| Ka-band satcom / defense radar | RO3003 / RT5880 | Ka-Band PCB Manufacturer → |
| Electronic warfare 2–40GHz | RT5880 / RO3003 | EW PCB Manufacturer → |
| AESA / phased array beamforming | RO3003, tight Dk uniformity | Phased Array PCB Manufacturer → |
| General Rogers PCB (all grades) | RO4350B to RO3010 | Rogers PCB Manufacturer → |
| PTFE-specific manufacturing | RO3003, RT5880, Taconic, F4B | PTFE PCB Manufacturer → |
| Tight impedance control | RO4350B / RO3003, ±5% TDR | Controlled Impedance PCB Manufacturer → |
Why Engineers Choose Riching PCB
- Rogers and PTFE materials in stock — most factories quote 3–4 weeks for RO3003 and RT5880; Riching PCB ships in 7–10 days
- In-house plasma activation— not outsourced, performed within the mandatory 2-hour window
- Controlled impedance ±10% standard, ±5% available with TDR reporton every panel
- Min trace/space 2.5mil/2.5mil — dense RF and feed network routing
- Min drill 0.2mm mechanical, 0.1mm laser — fine via fence and BGA pads
- IPC Class 2 standard, Class 3 on request — for defense and aerospace programs
- DFM review within 4–8 hours — before production starts
- DHL Express door-to-door — 3–5 days to USA / Europe / Israel after shipment
Common RF PCB Module Types
- RF front-end modules — 50Ω trace design, filters, amplifiers
- Antenna arrays — patch elements, feed networks, via fence isolation
- Radar modules — see 77GHz radar PCBand Ka-band PCB
- Phased array / beamforming — see phased array PCB
- Wideband EW modules — see EW PCB manufacturer
- Hybrid stackups — FR4 + Rogers hybridfor cost-optimized multilayer designs
How to Order
- WhatsApp: +86 13760473650
- Send: Gerber zip + NC drill + stackup drawing (material grade + dielectric thickness per layer)
- Specify: impedance target/tolerance, IPC Class, quantity
- DFM review: 4–8 hours
- No MOQ. From 1 board.
RF PCB Manufacturer — Shenzhen Direct Factory
Rogers & PTFE In Stock · 1–40 GHz Coverage
7–10 Day Prototype · No MOQ
Send Gerber + stackup drawing. DFM review within 4–8 hours.
No material procurement delay. IPC Class 2 / 3.
DFM review within 4–8 hours
Related Technical Guides
New to RF PCB sourcing? See Rogers PCB prototype China — lead times and files required and Rogers PCB quote — what to include for an accurate price.
Rogers PCB vs PTFE PCB — which to choose
PTFE PCB supplier checklist — 8 questions to ask
Request a PCB Quote
Upload your Gerber ZIP file and project requirements. Our engineering team will review your PCB material, stackup, impedance needs, surface finish, and production quantity before quoting.
Please prepare:
- Gerber files in ZIP format
- PCB material or stackup requirements
- Controlled impedance notes if available
- Prototype or batch production quantity